Drain Rods - Knowledge base.

Application:

• Drilling into concrete to create holes for pipes in sanitary, heating, and air conditioning installations.
• Creating openings for cable trays.
• Installing railings and barriers.
• Clearing blockages in pipes and drains

How to Use:

• Prepare the Machine: Ensure the machine is in good working condition and the power cord is properly grounded.
• Insert the Spiral Worm: Feed the spiral worm into the drain or pipe until you reach the blockage.
• Operate the Machine: Turn on the machine and use the forward and reverse modes to help the spiral worm break through the blockage.
• Remove the Blockage: Once the blockage is cleared, pull the spiral worm back out of the drain or pipe.
• Test the Drain: Run water through the drain to ensure it is clear.

Cautions:

• Safety Gear: Always wear leather gloves and protective eyewear.
• Avoid Water Contact: Ensure the power cord and machine are not in contact with water to prevent electrical shock.
• Do Not Force the Cable: Let the cutter do the work; forcing the cable can damage it or cause injury.
• Check for Damaged Parts: Inspect the machine for any damaged parts before use

How to Clean:

• Disconnect the Machine: Ensure the machine is turned off and unplugged.
• Clean the Spiral Worm: Use a brush to remove any debris or residue from the spiral worm.